Self Adhesive Vinyl Kit Car Switch Tag Stickers
If you have an older kit car or a classic with a rigid dash panel (not spongey!) and standard Lucas style toggle switches, you might often struggle to switch on what you need first time. Especially if you've been driving another car through the winter and cleverly forgotten the switch order....!
This set of labels is printed on brushed metal effect self adhesive vinyl and each one is computer diecut to an identical matching shape. The hole in them is the same diameter as the hole in the dash that a toggle switch fits through, with just a little extra material proud of the switch nut for effect. They are waterproof, weatherproof and won't fade.
They're made to closely resemble the old switch tags, so that the hole gives you a centre. Then you stand a reasonable chance of lining them up level if you use a bit of low tack masking tape on the dash as a guide. Naturally, you'll have to be careful when you tighten the switch nut back up so that you don't overdo it and rip them off again. The glue cures over a couple of weeks and then they should be impossible to move.
The switches listed are : Hazards, HRW, Heater (fan), Horn, Washers, Indicators, Interior Light, Lights, Map Light, Wipers.
Please note that these are stickers made to resemble metal dash tags, they are NOT actually metal.
Paypal only please!
